Edge and pocket depth can be set by loosening the knobs at the base of the board then sliding the insert to the desired hold depth and retightening.
Angle of slopers, in addition to edges/ pockets, can be adjusted by removing both side pins, resetting the board angle, then reinserting the pins into the appropriate metal bracket holes.
It is important to keep the metal brackets the correct distance apart for the angle adjustment to work properly.
All mounting hardware is included, with instruction, for attachment to either studded drywall or a plywood wall.
Please note to mount the board at least 1.5" above a door frame.
WARNING! BY USING THIS PRODUCT, YOU ACCEPT ALL RISK AND RESPONSIBILITY FOR ANY INJURY, DAMAGE OR DEATH THAT MAY RESULT.
Don't use this hangboard without the guidance of an experienced climber and/ or trainer.
Only pull straight down on the board, never put your fingers sideways in the pockets.
Don't grab over the finger stop at the back of the slopers.
Always double check the side pins are properly in position prior to using the board.